Vega Fence Owners Manual

10 inch Jobsite Saw PRO w/mobile cart and high/low fence system
Motor Configuration:120 VAC 60 Hz, Universal
Cord Length:116 inch
Sold and Shipped as Full Set Only with Cart :(no Cartless Option Available)
Motor Continuous HP:1.5 HP
Motor Peak HP:4 HP
Saw Dimensions without Cart (Body only):
31-3/4 W x 28-3/4 D x 15-1/2 H inch
Saw Dimensions with Open Cart (ready to use):48 W x 29 D x 36 H inch
Saw Dimensions with Closed Cart (on End/stored position):26-1/2 W x 29 D x 45 H inch
Table Dimensions (Retracted):31-1/4 W x 24-5/8 D inch
Table Dimensions (Extended):43-3/8 W x 24-5/8 D inch
Shipping Dimensions:32 W x 43 D x 26 H inch
Shipping Weight (with Cart):137 lbs
Weight (Saw Only):84 lbs
Weight (with Cart):113 lbs
Blade Diameter:10 inch
Dado Diameter:8 inch
Dado Max. Width:13/16 inch
Bevel Angle Range:-1 to 46
Max. Depth of Cut, Blade at 0 deg:3-1/8 inch
Max. Depth of Cut, Blade at 45 deg:2-1/8 inch
Max. Rip Right of Blade (Extended):25-1/2 inch
Max. Rip Left of Blade:9-3/4 inch
Arbor Diameter at Blade:5/8 inch
Table in Front of Blade (Max Elev):7-7/8 inch
Table Behind Blade (Max Elev):7-3/8 inch
Miter Slots T-shaped Dimensions:0.754 W x .413 D; T .956 W x .157 THK inch
Main Bearing Size:62mm OD x 30mm ID x 16mm W
Second Bearing Size:52mm OD x 25mm ID x 15mm W
Riving Knife/Splitter Thickness:
2.3mm (.090 inch)
Hand Wheel:Effective diameter 6.3 inch
Belts:Poly-V static dissipative belt
Table Flatness Measured Diagonally:0.033 inch Inches
Dust Collection Port Diameter:2-9/16 inch Outside, 2-1/4 inch Inside
Active Dust Collection Blade Guard:polycarbonate, extends 1 inch right of blade
Blade Guard (Dust Collection) Port Diameter:1-11/16 inch Outside, 1-3/8 inch Inside
  • Vega's company logo for over 30 years has been Rodin's Thinker. We believe innovation in design is the key to products that deliver the best performance and durability. Try a Vega Woodworking Machine and experience thoughtful manufacturing.
  • VEGA Grieshaber KG. Am Hohenstein 113. 77761 Schiltach. Tel.: +49 7836 50-0. Fax: +49 7836 50-201. General Terms and Conditions Imprint Data protection information. Data protection notice. We use cookies to continuously improve your experience at Some are technically necessary to be able to.
Vega Fence Owners Manual

Alberto Vega came over to give an estimate and to mark out where the fence posts would be going. He was always on time whenever I met with him. He called nd gave me a date when they would start the work. I subsequently got a call asking me if he could start a couple of days earlier and they came over and completed the fence in five hours. The Utility Model Vega Saw Fence System is available with 26 or 50 inch rip capacity to the right of the blade and 8 inch to the left. FENCE ACCESSORIES. Vega manufactures a number of great accessories for the Professional and Util- ity Model fences making them more convenient, productive and safer to use.


Vega manufactures a number of great accessories for the Professional and Util- ity Model fences making them more convenient, productive andsafer to use. All accessories are available for both models except the Leg Set which is not necessary for the Utility 26.

You compare the features!


No other Fence can be installed on your saw as easily as The Vega Saw Fence, according to American Woodworker Magazine (Oct.92) I found theVega Model 50 the easiest to install of all the fences.

Vega Saw Fences are designed to use existing bolt holes (no drilling required) of Delta Unisaws and Contractors Saws, Powermatic Model 66,most Sears 10inchsaws and most other sawshaving fence rail mounting holes 8 - 9inchoneither side of the blade. Other saws may require drilling 2 or 4 holes. Little accuracy is needed as the Fence Mounting System allows full adjustment. (Installation may be as little as 15 minutes.)Features which help make this Fence so easy to install include:

  1. Pre-drilled and tapped holes to fit most saws.
  2. Slotted Front Brackets to allow vertical and horizontal adjustments.
  3. Jacking Plates to assist in leveling the Fence Rails
  4. Easy to follow instructions.


Extruded from 6005 T6 high strength aluminum, the Vega fence head closely contours the polished chrome front rail providing excellent fitand nearly eliminating side play in the fence during adjustment. In ad- dition, the combination of the polished chrome tube and the aluminum head produces an almost ideal bearing surface for lowfriction and long life. The fence head simply lifts off the front rail for quick fence removal and installation.


The Vega Saw Fences are the only Fences with true Micro Adjustment capability. If you require precise adjustment from your tablesaw, thisis a necessary feature. The Micro Adjustment allows you to move the Fence very precisely in either direction, via a threaded rod humb nut combination. For the final adjustment of only a fewthousandths of an inch, Vega provides a threaded mechanism for final, precise setting.


To operate the Micro Adjust:

  1. Press down on the small knob at the right end of the Fence Head to lock the Micro Adjust Cam.
  2. Release the Main Cam.
  3. Rotate the Thumb Nut under the Fence head to move the Fence very precisely… (one full rotation of the nut is 1/16inch)
  4. After adjusting is complete, lock the Main Cam.


and hoping for the best! With other saw fences precise adjustments is achieved using this technique.


Vega has carefully chosen only the highest quality materials to construct their Saw Fences. Three unique precision aluminum extrusions, thehighest grade of plating quality tubing and super tough and attractive epoxy coating, combined with meticulous care in fabrication result in a truly superior product.

A. Front Guide Rails
The Front Fence Rail is a precision rolled, plating quality tube with a very thick wall for extreme stiffness. The bar is tapped for attachment of the front mounting brackets, table extensionplates, and the Vega leg kit (optional). It is chrome plated and plated and polished to provide an extremely low friction glide path for smooth and easy adjustment of the fence.

B. Rear Guide Rails
The Rear Fence Rail is a 1-1/2
inchsquare tubepredrilled for mounting to the exist- ing holes (in most saws) and tapped to hold the extension table support plates and Vega leg kit (optional). The Rail is epoxy coated for low friction, highdurability, and an attractive finish.

C. The Fence Bar
The Vega Fence Bars are aircraft quality aluminum alloy extrusions shaped for extreme stiffness while being relatively lightweight for easy handling. They are very accurate bars with side flatnessheld to extremely close tolerances, resulting in a very uniform surface to guide material through the saw blade for precision cuts. The Fence Bars have a Black Anodized finish which providesextreme surface hardness and low friction.

Vega Pro Fence System

D. Mounting Brackets
These extruded aluminum mounts help to make the Vega Saw Fence the easiest and fastest aftermarket saw fence to install. They provide simple and accurate vertical and horizontal adjustment for thefront guide rail and simply bolt to the saw table through existing holes (in most saws).

E. Jacking Plates
To further assist in easy and accurate installation, jacking plates (4) are provided at the mounting points of the front and rear rail to make leveling and setting fence clearance easy.

Vega Fence Owner's Manual Garage Door Opener

F. Rear Hold Down Bracket
The rear hold down bracket prevents the rear of the fence from raising if the fence issued in conjunction with stock feed systems. It is adjusted to just clear the lower side of the rear guiderail.

Vega Fence Owners Manuals

Support Plates For Extension Tables
(All Models except Pro 26 and Utility 26) To extend the work surface of your saw, Vega provides four Table Support Plates. Adobe photoshop cs6 mac crack. These Plates are bolted to the underside of the Front and Rear Fence Railsto support an extension table which can easily construct. In addition, the extension table will strengthen the Saw Fence System.